m+p Coda is a versatile monitoring system that captures and records signals coming from sensors such as accelerometers, thermocouples, strain gauges, and pressure transducers. Limit checking and alarm monitoring is provided for every active channel. The active channels are clearly displayed in a separate window, out-of-limit data can be seen at a glance. Alarm events are entered into a log file and can be reviewed at any time. You have the option to change the alarm limits online at any time without stopping the data acquisition.

Application Examples

  • Monitoring of Piping Systems

The mandatory inspection of piping systems in power plants is challenging because of their length and the severe environmental conditions. The networked monitoring system consists of the m+p Coda acquisition software installed on a standard PC and DAQ instruments which are located directly at the pipes. m+p Coda supports hundreds of channels to measure and monitor the thermal expansion, temperature, pressure, vibration and weight of the pipes. These measurements are taken by using thermocouples, LVDT (Linear Variable Differential Transformer) sensors, pressure transducers and strain gauge load cells.

  • Multi-Channel Monitoring of Turbocompressors

Turbocompressors for the oil, gas and process industries undergo comprehensive testing. m+p Coda is used for continuous data acquisition and real-time monitoring of performance data and thermodynamic parameters. Several compressors can be tested in parallel. To meet different demands, m+p Coda is available as a high-channel count stationary system as well as a rugged mobile system for acquisition and monitoring under original conditions at customers’ sites.

  • Vibration Monitoring during Shaker Test

Vibration tests must be safe and reliable and this is especially true for high value specimens. m+p Coda captures and records signals such as acceleration, temperature and strain during vibration tests, irrespective of the vibration control system in use. It allows you to set alarm limits for test shutdown or a warning on any of the active channels. Specimen and shaker are reliably protected, e.g. against misconfiguration or defective sensors.

Instrumentation

m+p Coda supports our m+p VibPilot, m+p VibRunner and m+p VibMobile measurement hardware for versatile monitoring applications – from low- to high-channel counts and for field and laboratory use.

  • m+p VibPilot
  • m+p VibRunner
  • m+p VibMobile

  • 结构坚固、紧凑、防尘
  • 4 或 8 个模拟输入通道(可扩展)
  • 最大 204.8 kHz 采样率
  • 24 位 Sigma-Delat A/D 转换器
  • 支持以太网和 USB 接口
  • 支持 IEPE 和 TEDS 传感器
  • 两个信号源输出通道
  • 2 个转速输入通道
  • 8 个数字输入和 8 个数字输出通道
  • 无风扇,低噪音
  • 支持多个 m+p VibPilot 同步

更多关于 m+p VibPilot 的信息。。。

  • •独立便携或 19 寸 1U 高度上架设计
  • 每台 m+p VibRunner 有 8-24 输入通道
  • 支持多台 m+p VibRunner 同步
  • 最高 204.8 kHz 采样率
  • 24 位 Sigma-Delat A/D 转换器
  • 1Gbit/s 网络接口
  • 支持 IEPE 和 TEDS 传感器输入
  • 应变信号调理
  • 每台 m+p VibRunner 有 2-12 信号源输出通道,支持安全关机
  • 2-12 转速输入通道
  • 每台 m+p VibRunner 有 8 个数字输入和 8 个数字输出通道

关于 m+p VibRunner 的更多信息。。。

  • 便携,可在实验场地或实验室使用
  • 电池可选,结构坚固,工作噪音小
  • 内置计算机(Win 7 操作系统,CPU 为 i7 处理器、主频为 2.4 GHz、RAM 为 8 GB、2 Gbit 网络连接、2 块固态硬盘),具有鼠标、键盘接口
  • 可以作为独立操作体统(应用软件已经安装在内置的电脑中)或者使用其它电脑通过网络连接将其作为前端硬件
  • 内置硬件同步触发模块,可实现多台设备同步,内置 2 个信号源和 2 个转速通道,内置 4 个数字输入/4 个数字输出模块
  • 桥路测量
  • 12 卡槽的主机箱支持最多 8 个 m+p 所有的 I/O 板卡和最多 4 块的 CompactPCI® 系列板卡,对模拟信号和数字 I/O、交流界面和存储设备 (GPS,CANbus,ProfiBus,EtherCAT,高速瞬态记录,RS-232 and RS-485,IRIG and ARINC 等)没有限制
  • 支持多台主机箱并联扩展

关于 m+p VibMobile 的更多信息。。。